.: Kit Contents:

NEW GTP V2 - lighter and improved assembly

-Kits are packaged and sealed neatly in custom size box.

-Laser cut 6mm and 3mm Depron sheets. Parts have small tabs which keep them safely locked in place until builder is ready to use them (keeps them safer in shipping and easier to keep track of small, unusual shapes). Slots, tabs, and helpful guides cut into parts.

-Laser cut expanded ABS parts to form higher stress components and control hardware.

-Assorted carbon rods and tubes.

-Wheels with custom axle modifications for smoother roll.

-Custom machined steering linkage.

-Suspension springs.

-Cut-to-length 1/32 music wire pushrods.

-EZ connector.

-Nylon EZ-Links.

-Ball Links.

-Heat shrink tubing.

-Detailed 15 page Instruction Booklet.

*ASSEMBLY REQUIRED, SAMPLE PHOTOS ARE OF FINISHED KITS WITH CUSTOMER PAINT SCHEMES AND MODIFICATIONS.

.: You will need:

-Glue: Polyurethane like Gorilla Glue or Sumo. Foam safe CA, UHU creative, hot melt glue ok for tacking together but use Poly-U in corners and high stress areas.

-Masking tape or assembly T-pins.

-Hinge tape

-Foam Safe paint or markers *KIT IS NOT PRE-PAINTED, IT IS WHITE DEPRON FOAM REQUIRING CUSTOMER COLOR SCHEME

-Exacto hobby knife

-Heat gun (for shrink tube)

-Dremel or cutoff saw (helpful)

-Radio/Motor/ESC/Battery listed below

.: Specs:

Span: 17"

Length: 28"

Surface Area: 404 sq"

Weight: 14.5-16oz/ 5oz sq'

Radio: 4-6 Ch with elevon mixing

Servos: (3) micro servos 12-14 oz torque (Hitec HS-55, Blue Bird 6g, etc)

Motor: 130-150 watt, 45-60g outrunner (Scorpion 2212-22, Hacker A20, Eflight 370, Axi, CD-Rom double). Motors that will spin a 8X4 to 9X6 HD at ~8600 RPM.

Battery: 3S 900-1500 (3S 1000-1320mAh most common)

Skill Level: Intermediate to Expert

Kits are $60 plus shipping within Continental US. Shipping outside of this will require additional postage.